REPLACEMENT PEDALS NOW EVEN BETTER VALUE!
We can supply replacement foot controls for most brands of tape transcription systems from major manufacturers like Sanyo, Philips, Sony, Olympus, Grundig and Panasonic.
Philips no longer supplies pedals for their models before the 700 series, but with one of our replacement pedals you can keep your analogue transcription equipment on the road.
If you need a new foot control for your transcriber you’ve come to the right place; browse down the page!
SANYO
If you have the following Sanyo models beginning TRC: 9300,
9200, 9020, 9020, 8800, 8090, 8080, 6400, 6040, 5400, 5200, 5040, 5020,
4300 and 4030 you need our IN-54.
£49.50
If you have the following Sanyo models beginning TRC: 8300, 8030, 7600, 7500, 7060,
7050, 7030, 6300, 6030, 5300, 5200, 5030, 5020, 4100, and 4141 you need our IN-53.
(See further down this section for replacement for the 7090.)
£49.50
If you have the following Sanyo models beginning TRC: 8070 and 8700 you need our IN-87.
£49.50
If you have the following Sanyo models beginning TRC: 9100, 9000, 9010, 9400 and 9040 you need our IN-92.
£49.50
If you have the following Sanyo models beginning TRC: 7090 you need for IN-210. Picture of IN-210 plug.
£49.50
NOTE:
The Sanyo TRC 7070, 7100, 5050, 5000X, 5000KX, 4040 and 4000 transcribers use their FS-91B pedal which has an unusual plug design and unfortunately we have no replacement pedal for this model.
SONY
If you have a Sony model beginning with BM and Sony foot control models FS-75 and FS-85, you need our IN-75. Picture of IN-75 plug.
£49.50
If you have a Sony model beginning M-2000 and M2020 using the FS-25 foot control, you need our IN-25. Picture of IN-25 plug.
£49.50
PHILIPS
If you have a Philips model using the 6-pin DIN plug including transcriber
models 505, 510, 550, 560, 670, 805 and 815 as well as others, you need our IN-110. Picture of IN-110 plug.
£49.50
If you have a Philips model in the 700 range with a 3.5mm mini-jack plug, including
710T, 720T, 725T, and 730T; also Philips digital transcriber models
9750 and 9850, you need our IN-210. Picture of IN-210 plug.
£49.50
PANASONIC
If you have Panasonic models RR-830 and RR930/D using the RP2692 foot control you need our IN-20. Picture of IN-20 plug.
£49.50
OLYMPUS
f you have Olympus transcribers using the RS-19 foot control, including models
T-1000, DT1000, T-1100 and DT-2000 (OEM models 1720T, 1730T and 1730) you need our IN-19. Picture of IN-19 plug.
£49.50
Our
IN-OS9 has a serial plug (female) and replaces the Olympus RS24 original
pedal. This is compatible with Olympus ProPlayer Transcription
Software using the DB9 (Serial Port) connector. This foot control
replaces the Olympus model RS-23 and RS-25 for use with the Olympus DSS
Player Transcription Software. Picture of IN-OS9 plug.
£49.50
Our IN-OHF has a DIN plug (male) and replaces the Olympus RS28 original pedal.
£49.50
DICTAPHONE
If you have a Dictaphone transcriber ending in 40 and 50, using an RJ-11 American phone plug you need our IN-585. Picture of IN-585 plug.
£49.50
If you have a Dictaphone models using a 14-pin plug you need our IN-557. Picture of IN-557 plug.
£49.50
GRUNDIG
If yu have Grundig desktop transcribers and Walkabout software you need our IN-GDX.
£49.50
Other foot pedals: